Page 1 - Simprolit system - flayer

®
SIMPROLIT MONOLITH– ELEMENT OF SIMPROLIT SYSTEM

Simprolit monolith belongs to the group of light concretes – VARIETY OF APPLICATION OF SIMPROLIT MONOLITH
polystyrene concrete. Thanks to its exceptional thermo physical and
physical-mechanical characteristics, Simprolit polystyrene concrete is In high-rises construction, Simprolit monolith is mostly applied:
used throughout anywhere where thermal-insulation features, ease - For thermal insulation of foundation plates and walls;
of construction, moisture resistance, resistance to moisture, frost and - Instead of the cement screed on floor plates, in the capacity of not
fire, steam permeability, high compressive strength, surface only the leveling but also the thermal and sound insulation layer;
toughness and durability, are determining factors in material - As an element of facade walls with supporting metal structure, as
selection.
well as thermal and fire protection covering of metal construction;
Simprolit monolith is patented capsulated Simprolit polystyrene - In the construction of new and the upgrading of old flat roofs;
concrete poured directly onto the site, where incorporated Simprolit
mass is surface-coated with cement mortar or adhesive on a cement - For the thermal protection of flat roofs made of corrugated sheet
®
basis with a thickness of 5 – 10 mm. metal, Simprolit has not only an insulating but also a unique fire
protection function;
The volume weight of Simprolit monolith, depending on the
required characteristics of the thermal insulation or the pressure - In the performance of flat roofs where Simprolit monolith has a
load, defines its „mark'' which is declared with multiple function – as a layer for slope, as a layer for thermal
insulation, as a basis for laying hydro insulation and as a layer for
D 250, D 300, D 350, D 400
hydro-insulation protection.
3
3
(250 kg/m - 400 kg/m , i.e. 4 to 2,5 times lighter than).
- In comparison with materials that are standardly applied for solving
By analyzing the characteristics of Simprolit monolith and its thermal insulation of flat roofs, Simprolit monolith distinguishes
behavior in exploitation, its following characteristics are defined: itself with the best ration of strength, frost resistance, moisture
Exceptional lightness,
resistance, fire resistance and thermo-physical characteristics;
Good steam permeability,
- By ability to perform multiple functions at the same time: as a
Environmental cleanliness and good sanitary- mechanical protection of hydro insulation, as a thermal layer and as
epidemiological parameters, a layer for slope (the layer of Simprolit monolith thickness is lighter
Maximum durability than cement screed 5cm thick!);
Resistance to extreme temperature conditions - Unique ability to increase the fire safety of roofs made of profiled
sheets.
The pressure strength of Simprolit insulating layer ranges from 12
2
tons/m to 110 tons/m , while exceeding the limit load does not In particular, the durability of flat roofs made of Simprolit monolith
2
cause fracture, but only the strain – a deformation of up to several should be emphasized. Namely, if a stone wool or Styrofoam is used
as a thermal insulation layer, their load is defined with a deformation
millimeters,
of 10%, which means they settle about 1.5cm – 2cm when the load is
- Simprolit monolith and its constructions are non combustible:
full. Such settling cannot withstand the hydro insulation above,
A2s1d0, fuel grade NC – non combustible. especially in the case of ventilation ducts, lifts, etc. which is the main
Application of Simprolit monolith as a replacement of cement reason that the contractor on a flat roof does not give a guarantee for
screeds and layer for slopes for flat roofs more than 5 years.
- For 17% - 22% reduces the required quantity of reinforcement of The flat roof made of Simprolit monolith with insulation
structural elements, and „Germokrov“ has the durability attest „not less than 25 years“ for the
- Together with Simprolit interfloors structures TWO TIMES increases territory of Russia, where Simprolit monolith is at the same time a
the resistance of the structure and the safety of the building to the layer for slope and thermo-insulation.
effects of the earthquakes